This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw


Cut Mode: FrameShop Cut Preview Screen

Set Advanced Options: Cut Mode

Set Advanced Options: Cut Mode

Select the desired Cut Mode for the CMC Z1 and Z (9000z).

Click the Set Advanced Options button on the Cut Preview to access the Advanced Outside Options. 

Make the desired selection from the Cut Mode dropdown control.

Click OK.

The selected Cut Mode will display on the Outside Cut Options.

Cut Mode

Cut Mode

Cut Mode Off

Select this topic to get information on having the Cut Mode Off.

Cut Mode Shared Edge

Select this topic to get information on having the Cut Mode Shared Edge.

Cut Mode Full

Select this topic to get information on having the Cut Mode Full.

Cut Mode As Designed

Select this topic to get information on having the Cut Mode As Designed.

The same Cut Mode selections are available on the Outside Cut Options toggle on the Cut Preview screen.

Select the desired outside cut option from the Outside Cut Options dropdown control.