90 Degree Outside Cut: FrameShop Cut Preview Screen

Use the 90 Degree Outside Cut toggle to select the 90 Degree Cartridge when cutting the outside of the mat on the CMC 9000.  

The CMC 8000 does not have the capability to cut with the 90 degree Cartridge.

To select the 90 Degree Outside Cut for the CMC Z1 and Z (9000z), see 90 Degree Outside Toggle in the Set Advanced Options.

Click the Outside Cut toggle to On in order to cut the outside of the mat.

Click the 90° Outside Cut toggle to On to cut the outside of the mat with the 90 Degree cartridge.  

Click the 90° Outside Cuts toggle to Off to not cut the outside of the mat with the 90 Degree cartridge.  

When the Cut the Outside toggle is On, the outside will be cut with the 45 Degree cartridge.

The default setting for Cutting the Outside can be set in the Admin > Editor section.

The default setting for 90 Degree Outside can be set in the Admin > Cutting section.