This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Rotate Mat 90 Degrees: FrameShop Cut Preview Screen
- dani.simmonds
Rotate Mat 90 Degrees Toggle |
|---|
Use the Rotate Mat 90 Degrees toggle to rotate the current design 90° clockwise for the CMC Z1, Z (9000z), 9000, and 8000. |
Rotate Mat 90° Off | |
|---|---|
Click the Rotate Mat 90° toggle to Off to display the mat at the original orientation. | |
Have the Rotate Mat 90° toggled Off. The design displayed at the original orientation. |  |
Rotate Mat 90° On | |
|---|---|
Click the Rotate Mat 90° toggle to On to rotate the current design clockwise by 90°. | |
Click the Rotate Mat 90° toggle to On to rotate the current design clockwise by 90°. This is useful when cutting a "too-tall" mat on the CMC in order to rotate it to cut it horizontally. Note: If cutting from the front, the design will rotate 90° counter-clockwise. |  |
Sheet Size | |
|---|---|
If your design doesn't fit on the mat, check the Sheet Size entered. | |
Enter the Sheet Size of matboard (e.g. 40 x 32) to be used for the design on the Setup Tab. This will affect the number of rows and columns when arranging a tiled layout. | |
Rotate on the Design Editor | |
|---|---|
Optionally, you can rotate the design on the Design Editor using the Rotation function. | |