Check out our new How To section at: How To...

Troubleshooting Non-Oval Objects

Owned by dani.simmonds
Aug 19, 2024
2 min read

Adjusting Non-Oval Objects

Adjusting Non-Oval Objects

  • The Troubleshooting screen displays the Flare and Swoop sections for Non-Oval Objects.

  • Select which part of the object to edit by clicking the Less Flare or Less Swoop buttons.

  • If the Object has a Swoop, select Less Swoop.

  • If the Object has a Flare, select Less Flare.

  • For Additional Information:

  • See Rotation for adjusting for a Swoop or Flare in a Non-Oval.

A Swoop in an object is where the corners Curve Inward toward the object.

If the Object has a Swoop, Increase the Rotation.

The Rotation controls for Swoops and Flares in Openings.

Swoop in the Corners
Rotation field

See: Swoop Rotation in Configurations

See: Swoop Rotation for Openings in Configurations

See: Swoop Rotation for Drops in Configurations

See: Swoop Rotation for Outside in Configurations

See: Swoop on Outside Rotation on V-Grooves Configurations

See: Swoop on Inside Rotation on V-Grooves Configurations

See: Swoop Rotation for Crease Configurations

A Flare in an object is where the corners Curve Away from the object.

If the Object has a Flare, Decrease the Rotation.

The Rotation controls for Swoops and Flares in Openings.

See: Flare Rotation in Configurations

See: Flare Rotation for Openings in Configurations

See: Flare Rotation for Drops in Configurations

See: Flare Rotation on Outside in Configurations

See: Flare on Outside Rotation on V-Grooves Configurations

See: Flare on Inside Rotation on V-Grooves Configurations

See: Flare Rotation on Crease Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.