Troubleshooting Utility for the Configurations

The Troubleshooting button will be grayed out/hidden if:

• There is more than one object in the design

• No object at all

• If you accessed the Configurations screen from the Main Screen

• You are running a Save-Only license

A Swoop in an object is where the corners Curve Inward toward the object.

If the Object has a Swoop, Increase the Rotation.

The Rotation controls for Swoops and Flares in Openings.

See: Swoop Rotation in Configurations

See: Swoop Rotation for Openings in Configurations

See: Swoop Rotation for Drops in Configurations

See: Swoop Rotation for Outside in Configurations

See: Swoop on Outside Rotation on V-Grooves Configurations

See: Swoop on Inside Rotation on V-Grooves Configurations

See: Swoop Rotation for Crease Configurations

A Flare in an object is where the corners Curve Away from the object.

If the Object has a Flare, Decrease the Rotation.

The Rotation controls for Swoops and Flares in Openings.

See: Flare Rotation in Configurations

See: Flare Rotation for Openings in Configurations

See: Flare Rotation for Drops in Configurations

See: Flare Rotation on Outside in Configurations

See: Flare on Outside Rotation on V-Grooves Configurations

See: Flare on Inside Rotation on V-Grooves Configurations

See: Flare Rotation on Crease Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

A Swoop in the Outside cut of the V-Groove is where the corners Curve Inward toward the V-Groove.

If the Outside cut of the V-Groove has a Swoop, Decrease the Outside Rotation.

The Rotation on V-Grooves controls for Swoops and Flares on V-Grooves.

See: Swoop on Outside Rotation on V-Grooves Configurations