Oval Outside has a Bump

Oval Outside has a Bump

For Additional Information:
See Troubleshooting Utility for information on adjusting for a Feather or Bump in an Oval.
See Circle/Oval Rotation Utility to adjust for a Feather or Bump in an Oval.

A Bump in an Oval Outside is a Lump of material left behind where the cut started and ended.

If the Oval Outside has a Bump, Increase the Oval Rotation.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

Bump in Oval Outside

Oval Rotation for Outsides

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

FrameShop 7x