Oval Opening has a Bump

Oval Opening has a Bump

For Additional Information:
See Troubleshooting Utility for information on adjusting for a Feather or Bump in an Oval.
See Circle/Oval Rotation Utility to adjust for a Feather or Bump in an Oval.

A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended.

If the Oval Opening has a Bump, Increase the Oval Rotation.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

Bump in the Oval Opening

Oval Rotation for Openings

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

FrameShop 7x