Check out our new How To section at: How To...

Cut the Outside Display

Owned by dani.simmonds

Aug 15, 2024

2 min read

Cut the Outside Display

Cut the Outside Display

The cutting preview will display and cut the Outside of the design if the Cut Outside toggle is selected On.
Toggle the Cut Outside Off to turn off this feature and the Cut Preview will no longer display nor cut the Outside of the mat.

For Additional Information:
See Matboard Properties in the Design to turn on/off the Outside cut.
Select Options Menu > Cut Outside on the Cut Preview to cut the outside of the mat.
See Cut the Outside on the Cut Preview to turn on/off the Outside cut.
See Enable Outside Cut under Advanced Outside Options on the Cut Preview to toggle on/off the Outside cut.
See Cut Outside Using 90 Degree Tool under Set Advanced Options on the Cut Preview.
See Cut Mode in the Set Advanced Options section on the Cut Preview.
See Shared Edge for the Cut Mode in the Set Advanced Options section on the Cut Preview.
See Full for the Cut Mode in the Set Advanced Options section on the Cut Preview.
See As Designed for the Cut Mode in the Set Advanced Options section on the Cut Preview.
See Remnant Trimming in the Set Advanced Options section on the Cut Preview.

Default Settings:
See Admin > Editor for the default settings for Cutting the Outside.
See Admin > Cutting for the default settings for the Advanced Options.
See Admin > Cutting for the default settings for the Cut Mode.
See Admin > Cutting for the default settings for 90 Degree Outside.
See Admin > Cutting for the default settings for Tiling.
See Admin > Cutting for the default size for the Spacing between designs.

Toggle the Outside Cut to Off to Not Cut the Outside of the Mat

If Any Cut Mode is Selected Other Than Off, it Will Cut the Outside of the Mat