90 Degree Outside Cut: Cut Preview Set Advanced Options

Use the Cut Outside using 90 Degree Tool toggle whether to cut the outside of the mat with the 90 Degree cartridge on the CMC Z1, Z (9000z), 9000 and 8000 Plus.

Click the Set Advanced Options button on the Cut Preview to access the Advanced Outside Options. 

Select the desired outside 90 Degree setting from the Cut Outside Using 90 Degree Tool toggle.  

• Click the Cut Outside Using 90 Degree Tool toggle to On to use the 90 Degree Cartridge when cutting the Outside.

• Click the Cut Outside Using 90 Degree Tool toggle to Off to use the 45 Degree Cartridge when cutting the Outside.

Click OK.

The CMC will cut the Outside of the mat with the selected setting.