Clamp Interference Display

The Cutting Preview will display if any of the Clamps will interfere with cutting the current design on the CMC Z1 and Z (9000z) by turning Red.	Clamp Interference Displays in Red
When you click Cut, it will display a screen indicating which Clamps need to be rotated. The CMC Z1 will also flash the individual LEDs on the specified Clamps in Red on the CMC Board itself. The LEDs for the individual Clamps that will not interfere with the current design will be displayed in Green.	The Interference Check Screen Displays the Clamps That Need to be Rotated
Rotate the indicated finger-clamps toward the edge of the board then click Continue to cut the mat.

FrameShop 7x