Optimized Cut Pattern: FrameShop Cut Preview Screen

Cut Pattern: Optimized

Cut Pattern: Optimized
Set Optimized from the Cut Pattern dropdown control to cut tiled mats bi-directionally, which will zig-zag back and forth when cutting the outside on tiled mats on the CMC Z1 and Z (9000z).
Click the Set Advanced Options button to access the Advanced Outside Options.
Select Optimized from the Cut Pattern dropdown control. Click OK.
It will cut the outsides of tiled mats in a bi-directional, zig-zag fashion.

Set the Default for Cutting the Outside

Set the Default for Cutting the Outside
The default setting for Cutting the Outside can be set in the Admin > Editor section.

Set the Default for 90 Degree Outside Cut

Set the Default for 90 Degree Outside Cut
The default setting for 90 Degree Outside can be set in the Admin > Cutting section.

Set the Default for the Advanced Options

Set the Default for the Advanced Options
The default setting for the Advanced Options can be set in the Admin > Cutting section.

Set the Default for the Cut Pattern

Set the Default for the Cut Pattern
The default setting for the Cut Mode can be set in the Admin > Cutting section.

Cut Pattern: Optimized