Unidirectional Cut Pattern: FrameShop Cut Preview Screen

Cut Pattern: Unidirectional

Cut Pattern: Unidirectional
Set Unidirectional from the Cut Pattern dropdown control to cut tiled mats in one direction only on the CMC Z1 and Click the Set Advanced Options button to access the Advanced Outside Options. .
Click the Set Advanced Options button to access the Advanced Outside Options.
Select Unidirectional from the Cut Pattern dropdown control. Click OK. This will cut the outside of tiled mats in one direction only. This is useful if you want the outside cuts of the tiled mats to be exactly the same size, as the sizes may be off by the thickness of the blade when it's cutting bi-directional (two different directions) when cutting the outside.
It will cut the outsides of tiled mats in a unilateral fashion, moving the head in only one direction.

Set the Default for Cutting the Outside

Set the Default for Cutting the Outside
The default setting for Cutting the Outside can be set in the Admin > Editor section.

Set the Default for 90 Degree Outside Cut

Set the Default for 90 Degree Outside Cut
The default setting for 90 Degree Outside can be set in the Admin > Cutting section.

Set the Default for the Advanced Options

Set the Default for the Advanced Options
The default setting for the Advanced Options can be set in the Admin > Cutting section.

Set the Default for the Cut Pattern

Set the Default for the Cut Pattern
The default setting for the Cut Mode can be set in the Admin > Cutting section.

Cut Pattern: Unidirectional