This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Optimized Cut Pattern: FrameShop Cut Preview Screen
- dani.simmonds
Cut Pattern: Optimized | |
|---|---|
Set Optimized from the Cut Pattern dropdown control to cut tiled mats bi-directionally, which will zig-zag back and forth when cutting the outside on tiled mats on the CMC Z1 and Z (9000z). | |
Click the Set Advanced Options button to access the Advanced Outside Options. |  |
Select Optimized from the Cut Pattern dropdown control. Click OK. |  |
It will cut the outsides of tiled mats in a bi-directional, zig-zag fashion. | |
Set the Default for Cutting the Outside | |
|---|---|
The default setting for Cutting the Outside can be set in the Admin > Editor section. | |
Set the Default for 90 Degree Outside Cut | |
|---|---|
The default setting for 90 Degree Outside can be set in the Admin > Cutting section. | |
Set the Default for the Advanced Options | |
|---|---|
The default setting for the Advanced Options can be set in the Admin > Cutting section. | |
Set the Default for the Cut Pattern | |
|---|---|
The default setting for the Cut Mode can be set in the Admin > Cutting section. | |