This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Unidirectional Cut Pattern: FrameShop Cut Preview Screen
Cut Pattern: Unidirectional | |
---|---|
Set Unidirectional from the Cut Pattern dropdown control to cut tiled mats in one direction only on the CMC Z1 and Click the Set Advanced Options button to access the Advanced Outside Options. . | |
Click the Set Advanced Options button to access the Advanced Outside Options. | |
Select Unidirectional from the Cut Pattern dropdown control. Click OK. This will cut the outside of tiled mats in one direction only. This is useful if you want the outside cuts of the tiled mats to be exactly the same size, as the sizes may be off by the thickness of the blade when it's cutting bi-directional (two different directions) when cutting the outside. | |
It will cut the outsides of tiled mats in a unilateral fashion, moving the head in only one direction. |
Set the Default for Cutting the Outside | |
---|---|
The default setting for Cutting the Outside can be set in the Admin > Editor section. |
Set the Default for 90 Degree Outside Cut | |
---|---|
The default setting for 90 Degree Outside can be set in the Admin > Cutting section. |
Set the Default for the Advanced Options | |
---|---|
The default setting for the Advanced Options can be set in the Admin > Cutting section. |
Set the Default for the Cut Pattern | |
---|---|
The default setting for the Cut Mode can be set in the Admin > Cutting section. |
Â