Stairstep Cut Pattern: FrameShop Cut Preview Screen
Cut Pattern: Stairstep | |
---|---|
Set Stairstep from the Cut Pattern dropdown control to cut tiled mats in a stairstep pattern on the CMC Z1 and Z (9000z). | |
Click the Set Advanced Options button to access the Advanced Outside Options. | |
Select Stairstep from the Cut Pattern dropdown control. Click OK.  | |
The outside of tiled mats will cut in a stairstep pattern, starting in the upper right and work its way down to the lower left in a stairstep pattern. |
Set the Default for Cutting the Outside | |
---|---|
The default setting for Cutting the Outside can be set in the Admin > Editor section. |
Set the Default for 90 Degree Outside Cut | |
---|---|
The default setting for 90 Degree Outside can be set in the Admin > Cutting section. |
Set the Default for the Advanced Options | |
---|---|
The default setting for the Advanced Options can be set in the Admin > Cutting section. |
Set the Default for the Cut Pattern | |
---|---|
The default setting for the Cut Mode can be set in the Admin > Cutting section. |