This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Interior Backup: FrameShop Configurations Screen
Interior Backup | |
---|---|
The Interior Backup is where the blade backs up before initially plunging into the fallout of the opening, such as when cutting a French Stair. Interior Cuts cut into the fallout of the opening, not the matboard. | The Interior Backup Field Controls Where the Blade Backs up Before Plunging into the Fallout on the Interior Cuts of Non-Oval Openings |
Select the Bevel Type for the Interior Backup to be Edited: | |
---|---|
Interior Backup on OpeningsThis is viewed from the front of the mat. Select this topic to see information on editing the Interior Backup on Openings.
| The Interior Backup Field Controls Where the Blade Backs up Before Plunging into the Fallout on the Interior Cuts of Non-Oval Openings |
Interior Backup on Drops ÂThis is viewed from the front of the mat. Select this topic to see information on editing the Interior Backup on Drops.
| |
Interior Backup on the OutsideThis is viewed from the front of the mat. Select this topic to see information on editing the Interior Backup on the Outside.
| |
Interior Backup on V-GroovesÂThis is viewed from the front of the mat. Select this topic to see information on editing the Interior Backup on V-Grooves.
|