This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Interior Overcut: FrameShop Configurations Screen
Interior Overcut | |
---|---|
The Interior Overcut is where the cut continues into the corner before retracting the blade from the fallout of the opening, such as when cutting a French Stair. Interior Cuts cut into the fallout of the opening, not the matboard. | The Interior Overcut Field Controls Where the Blade Continues into the Fallout Before Retracting the Blade on the Interior Cuts of Non-Oval Openings |
Select the Bevel Type for the Interior Overcut to be Edited: | |
---|---|
Interior Overcut on OpeningsThis is viewed from the front of the mat. Select this topic to see information on editing the Interior Overcut on Openings.
| The Interior Overcut Field Controls Where the Blade Continues into the Fallout Before Retracting the Blade on the Interior Cuts of Non-Oval Openings |
Interior Overcut on DropsThis is viewed from the front of the mat. Select this topic to see information on editing the Interior Overcut on Drops.
| |
Interior Overcut on the OutsideThis is viewed from the front of the mat. Select this topic to see information on editing the Interior Overcut on the Outside.
| |
Interior Overcut on V-GroovesÂThis is viewed from the front of the mat. Select this topic to see information on editing the Interior Overcut on V-Grooves.
|