This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Exterior Backup: FrameShop Configurations Screen
Exterior Backup | |
---|---|
The Exterior Backup is where the blade backs up before initially plunging into the matboard on the exterior cuts, such as when cutting a rectangle. Exterior Cuts cut into the matboard, not the fallout of the opening. | The Exterior Backup Field Controls Where the Blade Backs up Before Plunging into the Matboard on the Exterior Cuts of Non-Oval Openings |
Select the Bevel Type for the Exterior Backup to be Edited: | |
---|---|
Exterior Backup on OpeningsThis is viewed from the front of the mat. Select this topic to see information on editing the Exterior Backup on Openings.
| The Exterior Backup Field Controls Where the Blade Backs up Before Plunging into the Matboard on Exterior Cuts on Openings |
Exterior Backup on DropsThis is viewed from the front of the mat. Select this topic to see information on editing the Exterior Backup on Drops.
| |
Exterior Backup on the OutsideThis is viewed from the front of the mat. Select this topic to see information on editing the Exterior Backup on the Outside.
| |
Exterior Backup on V-GroovesÂThis is viewed from the front of the mat. Select this topic to see information on editing the Exterior Backup on V-Grooves.
| |
Exterior Backup on CreasesÂThis is viewed from the front of the mat. Select this topic to see information on editing the Exterior Backup on Creases.
|