This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Exterior Overcut: FrameShop Configurations Screen
Exterior Overcut | |
---|---|
The Exterior Overcut is where the cut continues into the corner before retracting the blade from the matboard on the exterior cuts, such as when cutting a rectangle. Exterior Cuts cut into the matboard, not the fallout of the opening. | The Exterior Overcut Field Controls Where the Blade Continues into the Corner Before Retracting the Blade on the Exterior Cuts of Non-Oval Openings |
Select the Bevel Type for the Exterior Overcut to be Edited: | |
---|---|
Exterior Overcut on OpeningsThis is viewed from the front of the mat. Select this topic to see information on editing the Exterior Overcut on Openings.
| The Exterior Overcut Field Controls Where the Blade Continues into the Corner Before Retracting the Blade on the Exterior Cuts of Non-Oval Openings |
Exterior Overcut on DropsÂThis is viewed from the front of the mat. Select this topic to see information on editing the Exterior Overcut on Drops.
| |
Exterior Overcut on the OutsideThis is viewed from the front of the mat. Select this topic to see information on editing the Exterior Overcut on the Outside.
| |
Exterior Overcut on V-GroovesÂThis is viewed from the front of the mat. Select this topic to see information on editing the Exterior Overcut on V-Grooves.
| |
Exterior Overcut on CreaseThis is viewed from the front of the mat. Select this topic to see information on editing the Exterior Overcut on Creases.
|