Trapezoid (Left or Right-Angled) using the #507: Pennant

These instructions will show you how to make a Left or Right-Angled Trapezoid using the #507: Pennant template.

Click New Mat Design on the FrameShop Main Page.

Click Cancel on the New Openings Screen.

On the Openings Tab, bring the template #507: Pennant template onto the Editor.

Click on the Properties Tab to edit it.

Enter the desired size for the #507: Pennant opening.

Click on the Parameters tab.

We will be designing the shape sideways and then rotating it.

Change the Parameters as desired.

For this example we changed:

• Tail is 0

• Taper is 1.25.