/
Adjusting Blade Depth: Eclipse Pro Legacy

Adjusting Blade Depth: Eclipse Pro Legacy

Owned by dani.simmonds
Last updated: May 24, 2024
1 min read

Adjusting Blade Depth

Adjusting Blade Depth

  • As you use different types of matboard, it may be necessary to change the Blade Depth. Follow these steps.

1. Loosen the brass thumb-nut above the cutting Head. Flip the locking handle counter-clockwise.

2. Carefully tip the cutting Head down.

Related content

Changing the Blade Depth
Changing the Blade Depth
FrameShop 7x
More like this
Changing the Blade: Eclipse Pro Legacy
Changing the Blade: Eclipse Pro Legacy
Knowledge Base
More like this
Changing the Blade Depth: FrameShop Cut Preview Screen
Changing the Blade Depth: FrameShop Cut Preview Screen
FrameShop 4x
More like this
Cutting V-Grooves on the Eclipse Pro Legacy
Cutting V-Grooves on the Eclipse Pro Legacy
Knowledge Base
More like this
Cut Preview: Measuring Blade Depth: MatDesigner
Cut Preview: Measuring Blade Depth: MatDesigner
Knowledge Base
More like this
Blade Depth: Software
Blade Depth: Software
FrameShop 7x
More like this