Changing the Blade: Eclipse Pro Legacy

• As you use the mat cutter it will be necessary to change the Blade. Follow these steps.

1. Loosen the brass thumb-nut above the cutting Head. Flip the locking handle counter-clockwise.

2. Carefully tip the cutting Head down.

3. Loosen the brass thumb-nut on the Blade carriage, slip the old Blade out.

4. Place the new Blade on the Blade carriage. Be sure the Blade seats inside the groove and all the way back against the small Blade screw.

5. Tighten the thumb-nut on the Blade carriage.
6. Replace the cutting Head into position, flip the locking handle clockwise and tighten the thumb-nut. Make sure the Head is tight in place before cutting. You are ready to cut.