Eclipse Pro Legacy: Replacing the Head Motors

Owned by dani.simmonds
Last updated: May 24, 2024
3 min read

These instructions will explain how to remove the Head, replace the motor, and reinstall the Head on the Eclipse.

Parts Needed

Parts Needed

3mm Allen Wrench, 1/8” Allen Wrench, 5/32” Allen Wrench

Remove Head

Remove Head

  • Shut down the system.

  • Remove four 3mm Allen Screws holding the Head cover in place.

  • There are two on the top and two on the bottom.

  • Unplug Head electrical connectors and airlines; firmly grasp connector/airline and pull apart.

Remove Motor

Remove Motor

Replace Motor

 

Replace Motor

 

Attach Head

Attach Head