Eclipse: Blade: Changing the 45°+ Blade

Push Blade Cartridge Release Lever down to eject the blade cartridge.

Remove the blade cartridge.

Remove the blade from blade cartridge; careful of the sharp edge.

The blade cartridge displays a diagram of the blade orientation (shown here in contrast).

Place new blade into cartridge in the same orientation as shown in the diagram.

Place the hole in the blade over the pin on the cartridge and the blade in the slot provided for it.

Turn the cartridge over and reinsert into the Trolley with the blade facing the CMC board and the notch on the back of the cartridge facing the Trolley.

Push it until it clicks into place. It can only be inserted one way