/

Cut the Outside Display

Cut the Outside Display

Owned by dani.simmonds

Last updated: Feb 20, 2025

2 min read

The Cut Preview will display and cut the Outside of the design if the Cut Outside toggle is selected On. Toggle the Cut Outside Off to turn off this feature and the Cut Preview will no longer display nor cut the Outside of the mat.	Toggle the Outside Cut to Off to Not Cut the Outside of the Mat
Optionally, the Outside of the mat will display and cut if a Cut Mode other than Off is selected on the Outside Cut Options dropdown control.	If Any Cut Mode is Selected Other Than Off, it Will Cut the Outside of the Mat

Related Links	Default Settings

Related Links

Default Settings

See Matboard Properties in the Design to turn on/off the Outside cut.
Select Options Menu > Cut Outside on the Cut Preview to cut the outside of the mat.
See Cut the Outside on the Cut Preview to turn on/off the Outside cut.
See Enable Outside Cut under Advanced Outside Options on the Cut Preview to toggle on/off the Outside cut.
See Cut Outside Using 90 Degree Tool under Set Advanced Options on the Cut Preview.
See Cut Mode in the Set Advanced Options section on the Cut Preview.
See Shared Edge for the Cut Mode in the Set Advanced Options section on the Cut Preview.
See Full for the Cut Mode in the Set Advanced Options section on the Cut Preview.
See As Designed for the Cut Mode in the Set Advanced Options section on the Cut Preview.
See Remnant Trimming in the Set Advanced Options section on the Cut Preview.

Related content

Not Cutting the Outside Display

Not Cutting the Outside Display

More like this

Cut Outside Options Menu: Cut Preview

Cut Outside Options Menu: Cut Preview

More like this

Cut the Outside: Cut Preview Toggle

Cut the Outside: Cut Preview Toggle

More like this

Outside Cut Off: Cut Preview Outside Cut Options

Outside Cut Off: Cut Preview Outside Cut Options

More like this

Cut the Outside: Editor Default Setting

Cut the Outside: Editor Default Setting

More like this

Outside Cut Off: Cut Mode Advanced Options

Outside Cut Off: Cut Mode Advanced Options

More like this