/
Cut Speed Percentage: Cut Speeds Screen

Cut Speed Percentage: Cut Speeds Screen

  • Use the Cut Speeds Slidebars on the Cut Speeds screen to set the Cut Speed percentage for the individual Blade Cartridges or Non-Blade Cartridges on the Cut Preview. 

  • Enter the desired Cut Speed Percentage for each Cartridge type.

  • For instance:

    • 100% is cutting at Full Speed.

    • 50% is cutting at Half Speed.  

  • When that particular Cartridge is used next, it will use the new Cut Speed entered.

  • Slowing down the cut speed can help when cutting intricate designs to help prevent the Head from skipping on tight corners. 

Cartridge Percentage Speed Screen

  • This example shows that the 90 Degree Cartridge will cut at 50% speed.

90° Cartridge will Cut 50% Speed