/
No Speed Reduction: Cut Speeds Screen

No Speed Reduction: Cut Speeds Screen

  • Use the No Automatic Speed Reduction for Depth of 16 and Above checkbox on the Cut Speeds screen to prompt for the VPO Head Air Pressure Adjustment to not apply any Speed Reductions for the 90° Cartridge when cutting thicker material on the Cut Preview. 

  • This is a feature of the VPO Head; not all CMC models have this feature.  

  • Select No Automatic Speed Reduction for Depth of 16 and Above if you do not want the CMC to reduce speed when cutting thicker material.

  • Unselect No Automatic Speed Reduction for Depth of 16 and Above to let the CMC automatically reduce speed when cutting thicker material.

    • NOTE: Depending upon the thickness and density of the matboard, you may get better cuts by slowing down the cutting speed.

BladeSelectDenseNoAutomaticSpeedReductionZ1-70800.png
No Automatic Speed Reduction for Depth of 16 and Above