Full Cut: Cut Mode

Full Cut: Cut Mode

Full Cut: Cut Mode
Select Full on the Cut Mode dropdown control to cut the complete Outside edges of the design on the CMC Z1, Z (9000z), 9000 and 8000+. Click the Set Advanced Options button to access the Advanced Outside Options. For Additional Information: See Matboard Properties in the Design to turn on/off the Outside cut. Select Options Menu > Cut Outside on the Cut Preview to cut the outside of the mat. See Cut the Outside on the Cut Preview to turn on/off the Outside cut. See Enable Outside Cut under Advanced Outside Options on the Cut Preview to toggle on/off the Outside cut. See Cut Outside Using 90 Degree Tool under Set Advanced Options on the Cut Preview. See Cut Mode in the Set Advanced Options section on the Cut Preview. See Shared Edge for the Cut Mode in the Set Advanced Options section on the Cut Preview. See As Designed for the Cut Mode in the Set Advanced Options section on the Cut Preview. See Remnant Trimming in the Set Advanced Options section on the Cut Preview.	Click Advanced Outside Options
	Select Full from the Cut Mode Dropdown Control
Remnant Trimming feature trims off the remaining portion of the mat Horizontally or Vertically after cutting the design to make storing the leftovers easier. See: Remnant Trimming Function

FrameShop 7x