Check out our new How To section at: How To...

90 Degree Outside Cut: Set Advanced

Owned by dani.simmonds

Last updated: Aug 15, 2024

3 min read

90 Degree Outside Cut: Set Advanced

90 Degree Outside Cut: Set Advanced

Use the Cut Outside using 90 Degree Tool toggle whether to cut the outside of the mat with the 90 Degree cartridge on the CMC Z1, Z (9000z), 9000 and 8000+.

Click the Set Advanced Options button on the Cut Preview to access the Advanced Outside Options.

For Additional Information:
See Matboard Properties in the Design to turn on/off the Outside cut.
Select Options Menu > Cut Outside on the Cut Preview to cut the outside of the mat.
See Cut the Outside on the Cut Preview to turn on/off the Outside cut.
See Enable Outside Cut under Advanced Outside Options on the Cut Preview to toggle on/off the Outside cut.
See Cut Mode in the Set Advanced Options section on the Cut Preview.
See Shared Edge for the Cut Mode in the Set Advanced Options section on the Cut Preview
See Full for the Cut Mode in the Set Advanced Options section on the Cut Preview.
See As Designed for the Cut Mode in the Set Advanced Options section on the Cut Preview.
See Remnant Trimming in the Set Advanced Options section on the Cut Preview.

A Cartridge is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool.

Cut Example and Cartridge with Blade

Click the Set Advanced Options Button to Open the Advanced Outside Options Screen

90 Degree Outside Cut Toggle On

90 Degree Outside Cut Toggle On

90 Degree Outside Cut Toggle Off

90 Degree Outside Cut Toggle Off