Check out our new How To section at: How To...

Rotate Mat 90 Degrees

Owned by dani.simmonds
Last updated: Aug 15, 2024
2 min read

Rotate Mat 90° Off

Rotate Mat 90° Off

  • Use the Rotate Mat 90 Degrees toggle to rotate the current design 90° Clockwise.

  • Click the Rotate Mat 90° toggle to Off to display the mat at the original orientation.

  • The design is displayed at the original orientation.

Design is Displayed at the Original Orientation When Rotate Mat 90° is Toggled Off

Rotate Mat 90° On

Rotate Mat 90° On

  • Click the Rotate Mat 90° toggle to On to rotate the current design Clockwise 90°. 

  • This is useful when cutting a "too-tall" mat on the CMC in order to rotate it to cut it horizontally.

  • If cutting from the front, the design will rotate 90° Counter-Clockwise.

The Rotation function in Cut Preview will rotate the current design 90° Clockwise.

This is helpful when a too-tall design is brought to the Cut Preview.

Design is Rotated Clockwise When the Rotate Mat 90° is Toggled On

See: Rotate Mat 90° Cut Preview Function

Sheet Size

Sheet Size