Check out our new How To section at: How To...

Enable Outside Cut: Set Advanced

Owned by dani.simmonds

Last updated: Aug 15, 2024

3 min read

Enable Outside Cut: Set Advanced

Enable Outside Cut: Set Advanced

Select whether to Cut the Outside with this toggle selection for the CMC Z1, Z(9000z), 9000 and 8000+.
Optionally, you could select the Cut Outside from the Outside Cut toggle.

Click the Set Advanced Options button to access the Advanced Outside Options.

For Additional Information:
See Matboard Properties in the Design to turn on/off the Outside cut.
Select Options Menu > Cut Outside on the Cut Preview to cut the outside of the mat.
See Cut the Outside on the Cut Preview to turn on/off the Outside cut.
See Enable Outside Cut under Advanced Outside Options on the Cut Preview to toggle on/off the Outside cut.
See Cut Outside Using 90 Degree Tool under Set Advanced Options on the Cut Preview.
See Cut Mode in the Set Advanced Options section on the Cut Preview.
See Shared Edge for the Cut Mode in the Set Advanced Options section on the Cut Preview
See Full for the Cut Mode in the Set Advanced Options section on the Cut Preview.
See As Designed for the Cut Mode in the Set Advanced Options section on the Cut Preview.
See Remnant Trimming in the Set Advanced Options section on the Cut Preview.

Select Set Advanced Options to Access the Advanced Outside Options

Select the Desired Outside Cut Setting from the Enable Cut Outside Toggle

Enable Outside Cut On

Enable Outside Cut On

Enable Outside Cut Off

Enable Outside Cut Off