This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw


Cut Current Mat: FrameShop Trace Editor

Cut Current Mat Button

Cut Current Mat Button

The Cut Current Mat button will bring the current design to the Cutting Preview Screen to cut.

Cutting the Current Mat

Cutting the Current Mat

Have the traced design open in Trace.

Click on the Cut Current Mat button.

The design opens up on the Cutting Preview Screen.

File > Send to CMC

File > Send to CMC

Optionally, click File > Send to CMC. 

This will also send the current design to the cut preview.