This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Set Bevels Tab: FrameShop Trace Editor
Set Bevels Tab | |
---|---|
The Set Bevels tab contains the tools needed to trace the design. Tracing the design provides the bevel type and other necessary information for the CMC in order to cut the design as desired. | |
Select this topic to see information on selecting the specific Bevel or Cartridge Type for the object being traced. | |
Select this topic to see information on selecting the desired Layer to trace the current object layer onto. | |
Select this topic to see information on Tracing the Design which walks through the process of tracing a design. |