This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Send to CMC: FrameShop Trace Editor

Owned by dani.simmonds

Last updated: May 18, 2021

1 min read

Send to CMC

Send to CMC

With the desired design on the screen, click File > Send to CMC.

The design is sent to the Cutting Preview Screen to cut.

Cut Current Design

Cut Current Design

Optionally, click the Cut Mat button.

This will send the current design to the cut preview.