This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
As Designed Cut Mode: FrameShop Cut Preview Screen
As Designed Cut Mode | |
---|---|
Select As Designed from the Cut Mode dropdown control to cut the outside as originally designed on the CMC Z1 and Z (9000z). | |
Click the Set Advanced Options button to access the Advanced Outside Options. | |
Select As Designed from the Cut Mode dropdown control. The outside edge of the design or tiled designs will be cut as originally designed. | |
This can be helpful when coming from Trace or Nesting where you had already selected how you want the outside(s) to be cut.  If you have Remnant Trimming on, it will also cut off the scrap edge. |
Set the Default for Cutting the Outside | |
---|---|
The default setting for Cutting the Outside can be set in the Admin > Editor section. |
Set the Default for 90 Degree Outside Cut | |
---|---|
The default setting for 90 Degree Outside can be set in the Admin > Cutting section. |
Set the Default for the Advanced Options | |
---|---|
The default setting for the Advanced Options can be set in the Admin > Cutting section. |
Set the Default for the Cut Mode | |
---|---|
The default setting for the Cut Mode can be set in the Admin > Cutting section. |