This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Aligning Openings: FrameShop Nesting Editor
- dani.simmonds
Aligning Openings |
|---|
Aligning Openings shows the different ways to align openings in the Nesting software. |
Alignment Lines | |
|---|---|
Click and drag openings to the desired position. You will see blue alignment lines display when an opening is aligned with a current opening's edges which makes dragging and dropping a quick and easy way to place openings. This is similar to the Auto Align Openings in Design and Auto Align Circuits in Trace. |  |
Using Alignment Lines | |
|---|---|
Hold down the CTRL key and click on two or more objects to activate the Alignment Buttons. These work just like the Alignment Buttons in FrameShop Designer editor. |  |
Align to Left Edge | |
|---|---|
The Align to Left Edge button will align the selected openings to the left-most edge of the selection. | |
This is similar to the Align to Left Edge in Design. | |
Align to Right Edge | |
|---|---|
The Align to Right Edge button will align the selected openings to the right-most edge of the selection. | |
This is similar to the Align to Right Edge in Design. | |
Align to Bottom Edge | |
|---|---|
The Align to Bottom Edge button will align the selected openings to the bottom-most edge of the selection. | |
This is similar to the Align to Bottom Edge in Design. | |
Align to Top Edge | |
|---|---|
The Align to Top Edge button will align the selected openings to the top-most edge of the selection. | |
This is similar to the Align to Top Edge in Design. | |