This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw


Menu Selections: FrameShop Design Editor

The FrameShop Design Editor Menu Selections have a variety of global commands available.

The FrameShop Design Editor Menu Selections have a variety of global commands available.

File Menu

Edit Menu

  • Undo: Reverse the last action.

  • Cut: Remove the selected objects and place them into the clipboard.

  • Copy: Place the selected object(s) onto the clipboard without removing them from the current design.

  • Paste: Paste the cut or copied object(s) into the current design.

  • Select All: Select all objects.

  • Send to Back: Send to Back. Send the current object to the back. 

  • Change Borders: Open the Border Properties.

  • Change Mat Size: Open the Matboard Properties.

  • Clear Design: Clear all objects from the Editor.

Options Menu

  • Cut Design: Bring the design to the Cut Preview to cut it. Optionally, hit F12 on the keyboard.

  • Show Opening Size Labels: Check this box to label the objects with the width/height of the object. Uncheck this box to not display the sizes; this will not remove labels that are manually entered on the Properties Tab for the object.

  • Auto Align Openings: Check this box to allow the software to display blue alignment lines that indicate when objects are aligned with each other. Uncheck to not auto align objects when arranging objects.

Help Menu

Right-Click Menu