This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Borders Properties: FrameShop Design Editor
Borders Properties | |
---|---|
Use the Border Properties to edit the individual proprietary adjustments available for the Borders. | |
Click on a green Border line and click on the Properties Tab. Edit the individual proprietary adjustments available for the Borders. Optionally, Right-Click on the Border Lines and select Edit Borders to open the Borders Properties. |
Borders Properties | |
---|---|
Edit the Border properties on the Properties tab. | |
Border Dimensions                         Enter the desired value for each border field. |
Set the Borders Defaults | |
---|---|
The default setting for the Borders can be set in the Admin > Editor section. |
Border Options | |
---|---|
Select the desired behavior of the Borders. | |
Even Borders Check the Even Borders checkbox to apply the same value to all four borders when one value is changed. | |
Uncheck the Even Borders checkbox to edit each border entry individually. Note: The Even Borders setting does not affect resizing the borders with the mouse. The Even Borders setting only affects the edit fields on the Borders Properties Tab. | |
Lock Borders Check the Lock Borders checkbox to lock the borders lines so they cannot be dragged or resized with the mouse. The Borders sizes can still be changed via the Properties Tab size field edit boxes. | |
Unlock Borders Uncheck the Lock Borders checkbox to unlock the border lines. The borders can then be dragged and resized with the mouse. |
Apply Borders To | |
---|---|
Select how you want objects to snap to the borders from the Apply Borders dropdown control. Select either Bottom Layer or Top Layer. |
Borders and Dynamic Outsides Toggle | |
---|---|
When using the Dynamic Outsides, the Apply Borders To properties indicates whether the Borders are added to the top layer or the bottom layer of the current objects on the Editor when creating the new outside dimension. | |
Apply Borders to Bottom Layer Here the Borders are positioning from the Bottom layer. | |
Apply Borders to Top Layer Here the Borders are positioning from the Top layer. |
Borders Toggle | |
---|---|
For information on toggling the Borders on/off, see Borders Toggle. |