This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Syncing Layers Across Sheets: FrameShop Nesting Editor
- dani.simmonds
Sync Layers Across Sheets |
|---|
When a multiple of designs are loaded into Nesting, they are loaded stacked upon one another. You will have to click and drag them to arrange them on the mat. If these are multiple-layered designs, you will also have to click and drag each opening on each layer to arrange them as well. Syncing the layers across the sheets auto-arranges the other design layers to match the current layer. |
Syncing Layers Across Sheets | |
|---|---|
You can arrange the designs on one layer and have them Sync up on the other layers to match the arrangement so that layout time is reduced. |  |
NOTE: A maximum of only 6 layers/SKUs is available. When you load a design containing SKUs, each SKU will be assigned to a layer. Therefore, if you load a combination of mats that contain more than 6 different SKUs, you will have to reduce the number of designs loaded until only 6 layers/SKUs maximum is loaded. |  |
Arrange the openings on the first sheet as desired. See Aligning Openings for information on aligning the openings. |  |
Click on Layout > Sync Layers Across Sheets. After a moment, the other layers will be moved into the same arrangement as the first sheet. Click through each layer to see that they are arranged in the same format as the first sheet. |  |