/
Layer Properties: FrameShop Nesting Editor

This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw


Layer Properties: FrameShop Nesting Editor

Layers Associated with SKUs

Layers Associated with SKUs

When you load a design containing SKUs, each SKU will be assigned to a layer. A maximum of six layers/SKUs is available. 

See Unable to Add One or More Design Layers for more information.

Layer Properties

Layer Properties

Click on an individual opening to display the Layer Properties

The Layer Properties displays the distance from the Left, the distance from the Bottom of the mat, and the outside Width and Height of the design.

Group Layer Properties

Group Layer Properties

Hold down the CTRL key and click on several openings to display the Group Layer Properties

The Group Layer Properties displays the distance from the Left, the distance from the Bottom of the mat.

Related content

Sheets: FrameShop Nesting Editor
Sheets: FrameShop Nesting Editor
More like this
Layers Associated with SKUs: Nesting
Layers Associated with SKUs: Nesting
More like this
Add Designs: FrameShop Nesting Editor
Add Designs: FrameShop Nesting Editor
More like this
Layers and SKUs: FrameShop Cut Preview Screen
Layers and SKUs: FrameShop Cut Preview Screen
More like this
Sheets Listing: Nesting
Sheets Listing: Nesting
More like this
Load Designs From Browse: : FrameShop Nesting Editor
Load Designs From Browse: : FrameShop Nesting Editor
More like this