ECU Ferrite Attachment Installation: CMC Z Series

To maintain compliance with Part 15 of the Federal Communications Commission, (FCC), and the Electromagnetic Compatibility, (EMC) standards, the enclosed Ferrite MUST BE installed on the output cable from the Power Supply.	Attach Ferrite to the Output Cable from the ECU Power Supply
Open the Ferrite using the latch on the side of the Core. Wrap three full turns of the ECU output cable from the Power Supply around the core, keeping the loops reasonably tight. Close the Ferrite.	Wrap Three Full Turns of the ECU Output Cable From the Power Supply Around the Core and Close

Knowledge Base