Upgrade/Termination Hardware Return Instructions for Full Board: CMC 8000
- dani.simmonds
Owned by dani.simmonds
Please box up the following four items for return |
|---|
Please use your original CMC box to box up the following four items into one box. If you do not have your original packaging the box the new CMC arrived in can be used. |
Head Removal | |
|---|---|
Caution: Head appearance may vary from model shown, but the connections are the same. Do not pick up Head using the blade depth knob or the Head cover. Pick up the Head by holding the “D-Shaped” upper and lower Head plates.
|  Pick up the Head by holding the “D-Shaped” upper and lower Head plates. |
|  Click Reset Motors if the Motors are Currently Engaged |
| |
Removing the ECU/Driver Pack | |
|---|---|
Secure the Gantry: Loosening Drive Belt | |
|---|---|
| |
Secure the Gantry: Remove Stop Plate | |
|---|---|
Magnetic Stop | |
|---|---|
Silver Gantry Stop Plate | |
|---|---|
Stop Screw | |
|---|---|
Attaching Shipping Blocks | |
|---|---|
Reinstall the Stop Plate |
|---|
Magnetic Gantry Stop | |
|---|---|
Silver Gantry Stop Plate | |
|---|---|
Stop Screw | |
|---|---|
Installing the Drive Belt onto the Rail | |
|---|---|
Packing up the Head | |
|---|---|
Packing up the ECU/Driver Pack | |
|---|---|
Boxing up the Board | |
|---|---|
Return the Parts |
|---|