Upgrade/Termination Hardware Return Instructions: CMC 8000 and 8500 Series

Owned by dani.simmonds
Last updated: Jun 19, 2024
10 min read

Please box up the following three items for return:

Please box up the following three items for return:

  • Gantry (a return box will be provided in the new shipment)

  • Head

  • ECU/Driver Pack

Please see the following removal and repacking for each item.

Straight Line Trimmer Removal

Straight Line Trimmer Removal

  • If your CMC has a Straight Line Trimmer, it must be taken off in order to remove the Head and Gantry.

  • Turn the shut off valve on the blue air line, and unplug the blue air line by untwisting the blue air fittings.

Shut Off Blue Air Line and Disconnect Blue Air Fittings

  • Turn the bottom locking knob clockwise to loosen.

Turn Locking Knob Clockwise to Loosen

Head Removal

Head Removal

Removing the ECU/Driver Pack

Removing the ECU/Driver Pack

Remove the Gantry

Remove the Gantry

Disconnect Gantry

Disconnect Gantry

Removing the Drive Belt from the Rail

Removing the Drive Belt from the Rail

Remove Stop Plate

Remove Stop Plate

Magnetic Gantry Stop

Magnetic Gantry Stop

Silver Gantry Stop Plate

Silver Gantry Stop Plate

Stop Screw

Stop Screw

Slide the Gantry Off of the Board

Slide the Gantry Off of the Board

Reinstall the Stop Plate

Reinstall the Stop Plate

Magnetic Gantry Stop

Magnetic Gantry Stop

Silver Gantry Stop Plate

Silver Gantry Stop Plate

Stop Screw

Stop Screw

Installing the Drive Belt onto the Rail

Installing the Drive Belt onto the Rail

Packing up the Head

Packing up the Head

Packing up the Gantry, ECU.\/Driver Pack and Head

Packing up the Gantry, ECU.\/Driver Pack and Head

Return the Parts

Return the Parts