Change to the Crease Cartridge

The Crease Cartridge is used to apply Crease marks that are used to assist in folding the thicker finished Box.

The Crease Cartridge is labeled in the software with a Perforation Symbol.

Make sure the Head and Footblock are already in the Aligned position.

Click the Align the Head button if necessary.           

Push blade cartridge release down to eject the current blade cartridge.

Turn Crease cartridge over and reinsert into the head with the notch on the back of the cartridge facing the head, until it clicks into place.

It can only be inserted one way.