Check out our new How To section at: How To...

Plunge on Non-Blade Cartridges

Owned by dani.simmonds
Last updated: Aug 19, 2024
2 min read

Plunge on Non-Blade Cartridges

Plunge on Non-Blade Cartridges

  • The Non-Blade Tool leaves a Dot where it plunges, unselect select Plunge.

  • The Non-Blade Tool takes Too Long to apply, select Plunge.

Select desired Cartridge Tab. 

Select the desired Bevel Type from Current Bevel Type.

Edit the desired Configuration field.

Plunge Field
Plunge of the Non-Blade Tool

Select Plunge

Select Plunge

  • The Non-Blade Tool takes Too Long to apply, select Plunge.

The Plunge function controls whether to Plunge/Unplunge between the Line/Arc Segments of an object when applying a Non-Blade Tool.

The Non-Blade Tool takes Too Long to apply, select Plunge.

This is different from the Plunge Count which controls the number of Blade Plunges for each Blade Cartridge before pausing for a Blade Change.

Unselect Plunge

Unselect Plunge

  • The Non-Blade Tool leaves a Dot where it plunges, unselect Plunge.

The Plunge function controls whether to Plunge/Unplunge between the Line/Arc Segments of an object when applying a Non-Blade Tool.

The Non-Blade Tool leaves a Dot where it plunges, select Unplunge.

This is different from the Plunge Count which controls the number of Blade Plunges for each Blade Cartridge before pausing for a Blade Change.