Check out our new How To section at: How To...

Horizontal Adjustment on Non-Blade Cartridges

Owned by dani.simmonds

Last updated: Aug 16, 2024

3 min read

Horizontal Adjustment on Non-Blade Cartridges

Horizontal Adjustment on Non-Blade Cartridges

If the Non-Blade Tool line is applied Too Far Left Horizontally, Increase the Horizontal Adjustment.
If the Non-Blade Tool line is applied Too Far Right Horizontally, Decrease the Horizontal Adjustment.

Contents:

For Additional Information:
See Horizontal Home which defines the global Horizontal placement of objects cut with the Blade Cartridges.
See Horizontal Home on the Troubleshooting Utility to adjust the bladed cartridges.

Select desired Cartridge Tab.

Select the desired Bevel Type from Current Bevel Type.

Edit the desired Configuration field.

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Horizontal Adjustment Field

Horizontal Adjustment of Non-Blade Tool Lines