Check out our new How To section at: How To...

Opening Adjustment

Owned by dani.simmonds
Last updated: May 29, 2024
4 min read

Opening Adjustment

  • The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges.

Contents:

The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges.

If the Opening is cut Too Large, Decrease the Opening Adjustment.

If the Opening is cut Too Small, Increase the Opening Adjustment.

Opening Adjustment Adjusts the Size of the Object
Opening Adjustment for Openings Configurations

See: Opening Adjustment for Openings Configurations

The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges.

If the Drop is cut Too Large, Decrease the Opening Adjustment.

If the Drop is cut Too Small, Increase the Opening Adjustment.

See: Opening Adjustment for Drops Configurations

The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges.

If the Outside is cut Too Large, Decrease the Opening Adjustment.

If the Outside is cut Too Small, Increase the Opening Adjustment.

See: Opening Adjustment for Outsides Configurations

The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges.

If the V-Groove is cut Too Large, Decrease the Opening Adjustment.

If the V-Groove is cut Too Small, Increase the Opening Adjustment.

See: Opening Adjustment for V-Grooves Configurations

The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges.

If the Deboss is Too Large, Decrease the Opening Adjustment.

If the Deboss is Too Small, Increase the Opening Adjustment.

See: Opening Adjustment for Deboss Configurations