Check out our new How To section at: How To...

Plunge Count Toggle

Owned by dani.simmonds

Last updated: Aug 15, 2024

3 min read

Plunge Count Toggle

Plunge Count Toggle

Use the Plunge Count toggle to automatically pause for a Blade Change after the specified Number of Blade Plunges entered on the Configurations screen.
- You may have to set the Cut Preview Screen to full screen to view this toggle.

Contents:

Click the Plunge Count toggle On.
The system will pause for a Blade Change after the specified Number of Blade Plunges.

For Additional Information:
See Set Number of Blade Plunges in the Configurations screen.
See Options > Enable Plunge Counts on the Cut Preview to toggle on the Plunge Count on the Cut Preview menu.

The Plunge Count controls the number of Blade Plunges for each Blade Cartridge before pausing for a Blade Change.

If it doesn’t prompt for a Blade Change during the cut, enter the Plunge Count value and select Plunge Count on the Cut Preview.

If you don’t want it to prompt for a Blade Change during the cut, unselect Plunge Count on the Cut Preview.

Adjust the Plunge Count to Pause the Cutting to Change the Blade After the Entered Number of Plunges

See: Plunge Count Function

See: Plunge Count Value Configurations

Having the Plunge Count Toggle On Will Pause the Cut For a Blade Change After the Number of Plunges Entered into the Configurations Screen