This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

View From Front/Back Toggle: FrameShop Trace Editor

Owned by dani.simmonds

Last updated: May 18, 2021

1 min read

*View from Front/Back Toggle**

**View from Front/Back* Toggle**

Toggle the View from Front/Back button to view from the front or back of the design.

*This is not the same as reversing the entire design. For information on reversing the design, see Flip Design or Mirror Design.

Viewing from the Front

Viewing from the Front

Click the View from Front toggle (View from Front toggle is On).

The project will be viewed from the front of the design.

Viewing from the Back

Viewing from the Back

Click the View from Back toggle (View from Front toggle is Off).

The project will be viewed from the back of the design.