This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw


Show Start Points: FrameShop Trace Editor

Show Start Points On

Show Start Points On

Options > Show Start Points Selected

Select the Options > Show Start Points feature to show the initial blade plunge and cut direction of traced objects on the Set Bevels and the Order Cuts Tabs. The Start Points are displayed as blue triangle arrows pointing to the cut direction.

Showing Start Points

Showing Start Points

Options > Show Start Points Selected

Select Options > Show Start Points Selected.

Have the traced design on the screen.

Click on the Set Bevels or Order Cuts Tab. 

This design displays that the initial blade plunge is at the bottom of the heart and that it will cut in a clockwise direction.

Show Start Points Off

Show Start Points Off

Options > Show Start Points Unselected 

Unselect the Options > Show Start Points feature to not display the start point of the initial blade plunge or the cut direction.

Showing Start Points Off

Showing Start Points Off

Options > Show Start Points Unselected

Unselect Options > Unclick Show Start Points to not display the start point or cut direction.

Have the traced design on the screen.

Click on the Set Bevels or Order Cuts Tab. 

This design does not display the initial blade plunge nor the cutting direction.Â